HPLC-fluorescence detection and adsorption of bisphenol A, 17beta-estradiol,and 17alpha-ethynyl estradiol on powdered activated carbon

The adsorption of three estrogenic compounds (bisphenol A (BPA), 17beta-estradiol (E2), and 17alpha-ethynyl estradiol (EE2)) on several powdered activated carbons (PAC) was investigated. Without preconcentration, method detection limits (MDL) using high-performance liquid chromatography (HPLC) with fluorescence detection at an excitation wavelength of 280 nm and an emission wavelength of 310 nm were 0.88, 1.15, and 0.96 nM for BPA, E2, and EE2, respectively. Compound recoveries were >90% in raw drinking water matrices. PAC screening studies (six PAC brands) indicated all three compounds were removed by PAC, but the percentage removal ranged from 31% to >99% based upon PAC type/dosage and presence/absence of natural organic matter. The order of removal (E2>EE2>BPA) corresponded with logK(ow) values for the compounds (3.1-4.0, 3.7-3.9, 3.3, respectively). Kinetic and PAC dose-response experiments were conducted with the two best performing PACs. Increasing contact time and PAC dose improved compound removal. Freundlich isotherm parameters were fit to the experimental data. This study confirms that PAC treatment is feasible for >99% removal of three estrogenic compounds from raw drinking waters that may be at risk for containing such compounds, at least at initial concentration of 500 ng/l and higher.     

The optimum operational condition of membrane bioreactor (MBR): cost estimation of aeration and sludge treatment

A methodology to obtain the most economical operational condition of membrane bioreactor (MBR) is developed. In order to achieve the optimum design parameters of MBR with which operational costs are minimized, aeration and sludge treatment costs were estimated for various operational conditions. Generally sludge treatment cost and aeration cost were inversely proportional to each other, which means sludge treatment cost is minimized when aeration cost is maximized and vice versa. Therefore, there might exist an optimum point between the two extreme cases. However, sludge treatment cost turned out to overwhelm the aeration cost over the reasonable operational conditions. Therefore, sludge minimization was considered to be a key for the economical operation of MBR. In the case of typical municipal wastewater of which COD was 400mgL(-1), steady-state MLSS was expected to increase from 11,000 to 15,000mg/L without sludge removal when HRT was decreasing from 16 to 12h. For the range of operational conditions considered in this study, economically optimum HRT and target MLSS were turned out to be 16h and 11,000mg/L, respectively. Under this condition, aeration for the biodegradation of organic matters would be 13.3m(3) air/min when influent was 1000m(3)/day.     

Free vibration analysis of horizontally curved steel I-girder bridges

Presented herein is a finite element formulation for free vibration analysis of horizontally curved steel I-girder bridges. Stiffness as well as mass matrices of the curved and the straight beam elements is formulated. Each node of both of them possesses seven degrees of freedom including the warping degree of freedom. The curved beam element is derived based on the Kang and Yoo's thin-walled curved beam theory in 1994. A computer program is developed to carry out free vibration analyses of the various bridges. Comparing with the frequencies using the general purpose program ABAQUS, the validity of the presented numerical formulation is shown. The numerical formulation is extensively applied to investigate free vibration characteristics of the bridges considering effects of the initial curvature, boundary condition, modeling method, and degrees of freedom of cross frame. Invaluable information which help practicing engineers better understand the vibration characteristics is provided.     

Kinetics and mechanisms of DMSO (dimethylsulfoxide) degradation by UV/H(2)O(2) process

The objective of this study was to elucidate the degradation pathways of dimethylsulfoxide (DMSO) during its mineralization caused by UV/H(2)O(2) treatment. In order to accomplish this, we measured the concentration time-profiles of DMSO and its degradation intermediates during the UV/H(2)O(2) treatment. In addition, we proposed a kinetic model that could account for the degradation pathways of DMSO during its UV/H(2)O(2) treatment. The results show that the degradation of DMSO by the UV/H(2)O(2) treatment can be classified into two major pathways, and this is supported by both the analysis of the intermediates and total organic carbon (TOC) measurements. Firstly, DMSO was degraded into sulfate (SO(4)(2-)) through the formation of methansulfinate (CH(3)SO(2)(-)) and methansulfonate (CH(3)SO(3)(-)) as sulfur-containing intermediates. One of the two carbon constituents of DMSO was highly resistant to mineralization, due to the formation of methansulfonate, which reacted very slowly with (.-)OH k = 0.8 x 10(7) M(-1)s(-1)). Secondly, the other carbon constituent of DMSO was relatively easily mineralized through the formation of formaldehyde (HCHO) and formate (HCO(2)(-)) as non-sulfur-containing intermediates. The kinetic model proposed in this study for the degradation of DMSO by (.-)OH in the UV/H(2)O(2) process was able to successfully predict the patterns of concentration time-profiles of all components during the UV/H(2)O(2) treatment of DMSO.     

Removal of bisphenol A and 17α-ethinyl estradiol from landfill leachate using single-walled carbon nanotubes

In this study, the adsorption of bisphenol A (BPA) and 17α-ethinyl estradiol (EE2) from landfill leachate onto single-walled carbon nanotubes (SWCNTs) was investigated. Different leachate solutions were prepared by altering the pH, ionic strength, and dissolved organic carbon (DOC) in the solutions to mimic the varying water conditions that occur in leachate during the various stages of waste decomposition. The youngest and oldest leachate solutions contained varying DOC and background chemistry and were represented by leachate Type A (pH = 5.0; DOC = 2500 mg/L; conductivity = 12,500 μS/cm; [Ca²⁺] = 1200 mg/L; [Mg²⁺] = 470 mg/L) and Type E (pH = 7.5; DOC = 250 mg/L; conductivity = 3250 μS/cm; [Ca²⁺] = 60 mg/L; [Mg²⁺] = 180 mg/L). These solutions were subsequently combined in different ratios to produce intermediate solutions, labeled B-D, to replicate time-dependent changes in leachate composition. Overall, a larger fraction of EE2 was removed as compared to BPA, consistent with its higher log K_OW value. The total removal of BPA and EE2 decreased in older leachate solutions, with the adsorptive capacity of SWCNTs decreasing in the order of leachate Type A > Type B > Type C > Type D > Type E. An increase in the pH from 3.5 to 11 decreased the adsorption of BPA by 22% in young leachate and by 10% in old leachate. The changes in pH did not affect the adsorption of EE2 in the young leachate, but did reduce adsorption by 32% in the old leachate. Adjusting the ionic strength using Na⁺ did not significantly impact adsorption, while increasing the concentration of Ca²⁺ resulted in a 12% increase in the adsorption of BPA and a 19% increase in the adsorption of EE2. DOC was revealed to be the most influential parameter in this study. In the presence of hydrophilic DOC, represented by glucose in this study, adsorption of the endocrine disrupting compounds (EDCs) onto the SWCNTs was not affected. In the absence of SWCNTs, hydrophobic DOC (i.e., humic acid) adsorbed 15-20% of BPA and EE2. However, when the humic acid and SWCNTs were both present, the overall adsorptive capacity of the SWCNTs was reduced. Hydrophobic (π-π electron donor-acceptor) interactions between the EDCs and the constituents in the leachate, as well as interactions between the SWCNTs and the EDCs, are proposed as potential adsorption mechanisms for BPA and EE2 onto SWCNTs.     

The effects of outdoor air supply rate on work performance during 8-h work period

The purpose of this study is to evaluate the effect of ventilation rate on work performance and perceived air quality through short-term laboratory experiments. The experiment was designed to simulate office work, and a laboratory space was modified using new finish materials to become a typical office space. High levels of volatile organic compounds (VOCs) were found in the exposure chamber, most probably originating from the new finishing materials that were present. Twenty-four subjects were divided into six groups that were randomly exposed to the three ventilation rates, 5, 10, and 20 l/s per person. The subjects performed work tasks three separate times for each ventilation rate over an 8-h exposure period. The work performance of the subjects logarithmically improved with increased ventilation rates, which was similar to the previous research findings. Statistical significance was found for addition task, text-typing task, and memorization task. Increased work performance in this experiment was slightly lower than the results of previous short-term laboratory experiments, yet remained higher than results of previous long-term field experiments. However, it was difficult to directly compare the results of this experiment with those of previous experiments, because of the higher concentration of VOC present in the office rooms and the learning effect associated with the repeated tasks. PRACTICAL IMPLICATIONS: The results of this experiment show that ventilation had positive impacts on perceived air quality and work performance for the subjects tested. Work performance logarithmically increased by approximately 2.5-5% as ventilation rates were increased from 5 to 20 l/s per person. The positive effect of ventilation rate on work performance was shown to be limited at the low ventilation rate. The positive effects on work performance were at lower ventilation rates. The learning effect in repeated work performance tasks could increase the uncertainty of the work performance analysis in 8-h exposure period.     

Zoning‐Based Vertical Transportation Optimization for Workers at Peak Time in a Skyscraper Construction

In a skyscraper construction, a great number of workers and materials must be vertically transported to the proper positions depending on their roles. Particularly, the optimal vertical transportation logistics of lift cars for workers at peak time should be established to enhance the entire project performance in a skyscraper construction. For achieving this objective, the zoning‐based concept can be introduced to improve the effectiveness of the vertical transportation logistics of lift cars for workers at peak time in a skyscraper construction. In developing the zoning‐based vertical transportation logistics, it is necessary to consider the minimization of the electricity consumption as an environmental index as well as the minimization of the operating time and the maximization of the cost effectiveness. Therefore, this study aims to develop a multi‐objective optimization model for solving the time–cost–environment trade‐off problem in establishing the zoning‐based vertical transportation logistics of lift cars for workers at peak time in a skyscraper construction.     

Low trihalomethane formation in Korean drinking water

Organics in water have the potential to generate harmful disinfection by-products (DBPs) such as trihalomethanes (THMs) during the chlorination process. To clarify the regulatory implications of Korean THMs levels which appear to be significantly lower than those in the US where the Stage 1 and 2 D/DBPs rule has been promulgated, the characteristics of THMs formation were investigated on five major river waters in Korea. Water samples were taken from 12 water treatment plants on five major rivers that serve as drinking water sources for more than 90% of the Korean population. Trihalomethane formation potential (THMFP), total organic halide formation potential (TOXFP) and ultraviolet absorbance at 254 nm (UV(254)) were determined and compared with those from US data. A survey of existing data [J Korean Soc Water Qual; 16(4) 2000b 431-443] provided evidence that THMs levels in treated drinking water in Korea were one-third of those reported in the US. The lower THMs levels were mainly attributable to the differences in the level and THMFP of dissolved organic carbon (DOC). The DOC levels and the THMFP normalized to DOC were approximately 60% of those in the US. Results which combined could quantitatively account for the lower THMs levels (i.e. 0.6 x 0.6 approximately 1/3) in Korea. The observed Korean THMs levels were over-predicted by the THMs model () developed in the US. The level of THMFP was found to be similar if normalized for aromaticity as measured by UV(254). These findings suggest that: (i) the case for more stringent THMs control is not likely to be a high priority among issues of drinking water quality in Korea; and (ii) significant variation of THMFP level may exist over different geographic regions; hence (iii) independent THMs models should be developed to make accurate predictions for different regions.     

Synthesis of graphene/vitamin C template-controlled polyaniline nanotubes composite for high performance supercapacitor electrode

A graphene nanosheet/polyaniline nanotube (GPNT) composite is prepared for the first time by in-situ chemical oxidative polymerization of aniline using vitamin C as a structure directing agent. The vitamin C molecules lead to the synthesis of polyaniline (PANI) nanotubes through the development of rod-like assembly by H-bonding in an aqueous medium. The initially synthesized graphene oxide/polyaniline nanotubes composite is reduced to graphene using hydrazine monohydrate followed by re-oxidation and protonation of the PANI to produce the GPNT nanocomposite. This novel composite showed a high specific capacitance of 534.37 F/g and an excellent energy density of 74.27 Wh/kg at a constant current of 0.5 mA. Besides, the GPNT composite exhibited excellent cycle life with 91.4% specific capacitance retained after 500 charge-discharge cycles. The excellent performance is due to the synergistic combination of graphene which provides good electrical conductivity and mechanical stability, and PANI nanofiber which deals with good redox activity.     

Leaching kinetics of neodymium in sulfuric acid from E-scrap of NdFeB permanent magnet

The leaching kinetics of neodymium in NdFeB permanent magnet powder was analyzed for the purpose of recovery of neodymium in sulfuric acid (H₂SO₄) from E-scrap (electric scrap) of NdFeB permanent magnet powder treated by oxidation roasting to form a reactant. The reaction was conducted with H₂SO₄ concentrations ranging from 2.5 to 3.5M, a pulp density of 110.8 g/L, an agitation speed of 750 rpm, and a temperature range of 30 to 70 °C. After 4 h of leaching, the neodymium content in the E-scrap powders was completely converted into a neodymium sulfate (Nd₂(SO₄)₃) solution phase in H₂SO₄ in the condition of 70 °C and 3.0M H₂SO₄. Based on a shrinking core model with sphere shape, the leaching mechanism of neodymium was determined by the rate-determining step of the ash layer diffusion. Generally, the solubility of pure rare earth elements in H₂SO₄ is decreased with an increase in leaching temperatures. However, the leaching rate of the neodymium in E-scrap powders increased with the leaching temperatures in this study because the ash layer included in the E-scrap powder provided resistance against the leaching. Using the Arrhenius expression, the apparent activation energy values were determined to be 2.26 kJmol^?1 in 2.5M H₂SO₄ and 2.77 kJmol^?1 in 3.0 M H₂SO₄.